How to make the collar from the Stargate Anubis Guard
For those intent on becoming the Prime of Ra and adopting the appearance of ancient Egyptian gods to terrorize the populace, welcome to my step-by-step guide of becoming the Anubis guard in the Stargate film. Most of these elements are going to be made from EVA foam, so this simple collar-piece was a good introduction to cutting, detailing, shaping, and painting foam. References Materials -8mm EVA foam -E600 clear glue -Dark copper metallic spray paint -Plastidip -Turquoise acrylic paint Tools -Dremel tool with sanding attachment -Box cutter -Woodburner -Foam wedge for painting, paper towels 1. Gather the materials For this build, you're going to need a thinner EVA foam most easily purchased these days from craft stores. I chose a 8mm thickness, picking up a roll from a craft store for about $20. For this project, I needed about a third of the 24in x 60in roll. For the paints, I chose a dark copper metallic spray paint from Rustoleum. For the Horus guards...